Fabricators of Adhesive Tapes & Flexible Materials
MBK 3122PR is a 3 mil Double Coated Polyester Film with solvent based acrylic adhesive coating on both sides, but with different coating weights. One side of the tape has higher adhesion, allowing for quick fastening while the other side is removable.
Unit of Measure



Brand Part Number

N/A 3122PR

Primary Application

N/A Industrial Laminating

Application Description

  • Laminating to porous surface such as foam, sandpaper, texture, etc.
  • Temporary fixing of billboards, nameplates and emblems


  • Quick fastening
  • Good punch performance without edge residue
  • Lamination to porous surface

Markets Served

N/A Displays Graphics


N/A Polyester Film

Adhesive Coating

N/A Differential Double Coated

Adhesive Type

N/A Exposed Side: Permanent Acrylic Liner Side: Removable Acrylic

Release Liner

N/A 60 lb White Glassine Paper (3 mil)

Adhesive Thickness

N/A 3.0 mil


N/A Clear

Maximum Width/ Master Roll Width

N/A 54 in

Adhesion to Steel

N/A Test PSTC-1: Exposed Side 49.4 oz/inTest PSTC-1: Liner Side 28.2 oz/in

Service/Operating Temperature

N/A -4 to 248 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

Backing / Carrier Thickness

N/A 0.5 mil
© 2018, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform