Fabricators of Adhesive Tapes & Flexible Materials
Avery Dennison® FT 1115 is a 4.7 mil acrylic adhesive Transfer Tape supplied with a densified kraft release liner.  This adhesive transfer tape is used for bonding to foams and other low energy substrates where mild plasticizers and elevated temperatures are present.   
Unit of Measure


N/A Avery Dennison®

Brand Part Number

N/A FT 1115

Primary Application

N/A Bonding

Application Description

  • Foam and fiber bonding
  • Seat heating
  • Graphics
  • Cable wrap
  • Assembly
  • Control panel attachment
  • Decorative trims
  • Nameplates
  • Illuminated displays
  • Exterior mirror housing
  • Brake shoe assemblies
  • Medical devices


  • Adheres to wide variety of substrates including metal, foams, plastics, fabrics and other LSE low surface energy substrates
  • Excellent foam bonding characteristics
  • Excellent initial tack and adhesion
  • Resists effects of mild plasticizers and elevated temperatures
  • Ease of removal during application

Markets Served

N/A Appliances Automotive Graphics Manufacturing Medical


N/A Unsupported

Adhesive Type

N/A Acrylic (4.7 mil)

Release Liner

N/A 80 lb Densified Kraft Paper (4.6 mil)

Adhesive Thickness

N/A 4.7 mil


N/A Clear

Maximum Width/ Master Roll Width

N/A 54 in

Adhesion to Steel

N/A 77 oz/in

Service/Operating Temperature

N/A 50° to 200 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2020, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform