Fabricators of Adhesive Tapes & Flexible Materials
3M™ Bumpon™ Protective Products are polyurethane pressure-sensitive synthetic rubber adhesive-backed products that can be used as feet, stops, spacers, and protectors in many applications.
Unit of Measure


N/A 3M™

Brand Part Number

N/A 3M™ SJ-6100


  • This very high tack adhesive system provides excellent initial adhesion
  • Excellent adhesion to a wide variety of substrates, including many LSE low surface energy substrates such as powder coated paints, polypropylene, and polyethylene
  • Excellent adhesion to HSE high surface energy substrates such as metals, glass, polycarbonate and acrylic
  • Good dynamic and static shear
  • Good solvent resistance
  • Good age life

Markets Served

N/A Automotive Electrical Electronics Manufacturing


N/A Polyurethane Bumpons

Adhesive Coating

N/A Single Coated

Adhesive Type

N/A Synthetic Rubber R-25


N/A 70 Durometer, Shore "A"

Tensile Strength

N/A 600 lb²/in

Service/Operating Temperature

N/A -30 to 150 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2018, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform