Fabricators of Adhesive Tapes & Flexible Materials
3M™ VHB™ F9460PC Adhesive Transfer Tape is a high strength 2 mil acrylic 100MP adhesive with 58 lb. polycoated kraft paper liner - printed. VHB Transfer Tapes offer excellent long term holding power with much higher adhesion strength than typical pressure sensitive systems. With a UL 746C rating, these tapes are ideal for many interior and exterior industrial applications. Available in printed (F9460PC) and unprinted (9460PC) versions.
Unit of Measure


N/A 3M™

Brand Part Number

N/A 3M F9460PC

Primary Application

N/A Bonding Industrial

Application Description

  • Use for industrial joining and metal fabrication
  • Bond decorative metal trim
  • Bond flexible circuits to aluminum rigidizers or heat sinks
  • Replace rivets, pot welds, liquid adhesives and other permanent adhesives in interior and exterior industrial applications


  • Very High Bond (VHB)
  • Excellent long term holding pattern
  • High temperature, moisture and solvent resistance
  • Used for HSE high energy and LSE low energy substrates
  • UL listing 746C

Markets Served

N/A Electrical Electronics Manufacturing


N/A Unsupported

Adhesive Type

N/A Acrylic 100

Release Liner

N/A 58 lb Polycoated Kraft Paper

Adhesive Thickness

N/A 2.0 mil

Maximum Width/ Master Roll Width

N/A 60 in

Adhesion to Steel

N/A 10 oz/in

Service/Operating Temperature

N/A Long Term -40 to 300 ºFShort Term -40 to 500 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2018, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform