Fabricators of Adhesive Tapes & Flexible Materials
MBK 200 is a soft 6 mil PVC Polyvinyl Chloride film coated with rubber based pressure sensitive adhesive on one side. Available in 13 OSHA colors and used for industrial identification, color-coding, aisle marking and duct wrapping.
Unit of Measure



Brand Part Number

N/A MBK 200

Primary Application

N/A Decorating Gaskets Industrial Marking Masking Packaging Safety Sealing

Application Description

  • Aisle marking and duct wrapping
  • Color-coding
  • Industrial identification
  • Marking both warehouse lands and hazards
  • Mask in electroplating operations
  • Sealing tops of containers
  • Decorative strips


  • Excellent anti-abrasion
  • Flexible and resistant to acid, alkalis and oils
  • Non-corrosive, pressure sensitive adhesive
  • Latex free
  • Meets OSHA requirements 1910.144
  • Meet Government Spec PPP-T-66d Type 1, Class 2

Markets Served

N/A Manufacturing Packaging Recreation Construction


N/A PVC Polyvinyl Chloride Film

Adhesive Coating

N/A Single Coated

Adhesive Type

N/A Rubber Based

Adhesive Thickness

N/A 6.0 mil


N/A Black Blue Brown Clear Fluorescent Green Fluorescent Yellow Green Orange Pink Purple Red White Yellow

Maximum Width/ Master Roll Width

N/A 49 in

Adhesion to Steel

N/A 22 oz/in

Tensile Strength

N/A 16 lb/in

Service/Operating Temperature

N/A 140 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2018, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform