Fabricators of Adhesive Tapes & Flexible Materials
3M™ 1772 Medical Foam Tape is a a closed cell, white polyethylene foam, coated with an acrylate adhesive on one side.  The liner is a silicone treated, polyethylene coated, bleached Kraft paper. This soft and water-resistant foam tape is typically used for adhering medical devices to the skin.
Unit of Measure


N/A 3M™

Brand Part Number

N/A 3M 1772

Primary Application

N/A Medical

Application Description

  • Designed for medical/surgical applications
  • Adhereing monitoring and diagnostic devices


  • Hypoallergenic Pressure Sensitive Adhesive
  • Extra thick cushioning and insulation
  • ETO & Gamma Compatible
  • Good adhesion to the skin
  • Printable backing and liner
  • Fluid resistance

Markets Served

N/A Medical


N/A Polyethylene Foam

Adhesive Coating

N/A Single Coated

Adhesive Type

N/A Acrylate

Release Liner

N/A 83 lb Polycoated Kraft Paper - C1S Silicone (6 mil)

Adhesive Thickness

N/A 65.0 mil


N/A White

Maximum Width/ Master Roll Width

N/A 48 in

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

Backing / Carrier Thickness

N/A 63.0 mil
© 2018, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform