Mactac® IB4132-72 consists of a .5 mil polyester carrier coated on both sides with 2.4 mils of high-tack acrylic pressure sensitive adhesive. The adhesive is protected by a two-sided silicone coated 72# polycoated Kraft liner. This product is designed for general purpose applications that require high initial tack to a wide variety of substrates.
Unit of Measure
Manufacturer |
N/A Mactac® |
Brand Part Number |
N/A Mactac® IB4132-72 |
Primary Application |
N/A Bonding Gaskets |
Application Description |
N/A
|
Features |
N/A
|
Markets Served |
N/A Aerospace Displays Manufacturing Transportation |
Materials/Backing/Carrier |
N/A Polyester Film |
Backing / Carrier Thickness |
N/A 0.5 mil |
Adhesive Coating |
N/A Double Coated |
Adhesive Type |
N/A MP410 High Tack Acrylic |
Adhesive Thickness for Exposed/Unwind Side |
N/A 2.4 mil |
Adhesive Thickness for Liner Side |
N/A 2.4 mil |
Release Liner |
N/A 72 lb Bleached Polycoated Kraft Paper |
Adhesive Thickness |
N/A 5.3 mil |
Color |
N/A Clear |
Maximum Width/ Master Roll Width |
N/A 54 in |
Tack Level |
N/A 7.0 lb/in² |
Tensile Strength |
N/A MD/CD: 10 lb/in |
Service/Operating Temperature |
N/A Application: Above 50 ºFService Range: -40 to 250 ºF |
|
N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective. |
|
Downloads |
N/A
Mactac IB4132 72 DC PET Tape Data Sheet 2016 |
