Fabricators of Adhesive Tapes & Flexible Materials
3M™ Bumpon™ Protective Products - Molded Shapes Series are polyurethane pressure-sensitive natural rubber adhesive-backed products that can be used as feet, stops, spacers, and protectors in many applications.
Unit of Measure


N/A 3M™

Brand Part Number

N/A 3M™ SJ-5000 / SJ-5500 / SJ-5700

Application Description

  • Feet on the bottom of blenders, desk top calculators, electronic cabinetry, keyboards, clocks, speakers, dispensers
  • Stops for cabinet doors, lids, and drawers
  • Spacers for picture frames and auto glass
  • Protectors for stacked glass and metal sheets


  • Adhesive system provides good initial and peel adhesion
  • Good adhesion to a wide variety of substrates, including many LSE low surface energy substrates such as powder coated paints, polypropylene, and polyethylene and HSE substrates
  • Excellent skid resistance
  • Long aging resiliency - will not crack or harden
  • Abrasion resistance

Markets Served

N/A Automotive Electrical Electronics Manufacturing


N/A Polyurethane Bumpons

Adhesive Coating

N/A Single Coated

Adhesive Type

N/A Natural Rubber R-30


N/A 70 Durometer, Shore "A"

Tensile Strength

N/A 600 lb²/in

Elongation Percentage

N/A 100 %

Service/Operating Temperature

N/A -30 to 150 ºF

Electrical/Dielectric Strength

N/A 200 V

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2020, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform