Valox® FR-1 Film is a flame retardant thermoplastic Polybutylene Terephthalate (PBT) film offering good temperature performance and outstanding dielectric strength making it an excellent candidate for a wide range of electrical, electronic and medical applications.
Valox® thermoplastic polyester resins are based on PBT and/or PET polymers and are highly tailorable, combining heat, chemical resistance, and outstanding electrical properties with exceptional good process ability and surface appearance. Custom adhesive backings, sizes, shapes and configurations are available upon request.
Manufacturer |
N/A General Electric |
Brand Part Number |
N/A VALOX FR1 |
Primary Application |
N/A Electrical Medical |
Application Description |
N/A
|
Features |
N/A
|
Markets Served |
N/A Electrical Electronics Medical |
Materials/Backing/Carrier |
N/A Valox Film |
Adhesive Coating |
N/A No Adhesive |
Adhesive Type |
N/A Plain |
Total Thickness |
N/A 15.0 mil |
Color |
N/A Tan |
Maximum Width/ Master Roll Width |
N/A 36 in |
Tensile Strength |
N/A 22 lb/in |
Elongation Percentage |
N/A 57 % |
Electrical/Dielectric Strength |
N/A 1.09 to 3.3 kv/mil |
|
N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective. |
|
