Fabricators of Adhesive Tapes & Flexible Materials
3M™ 9793R Polyolefin Diagnostic Tape consists of a clear polypropylene film coated on one side with a pressure sensitive acrylic-based adhesive, supplied on a white silicone coated paper release liner. This medical tape is primarily used for bioanyltical devices and diagnostic test strips.
Unit of Measure


N/A 3M™

Brand Part Number

N/A 3M 9793R

Primary Application

N/A Medical

Application Description

  • Bioanalytical devices
  • Diagnostic point of care test strips


  • Low Auto-Fluorescence
  • Hydrophobic adhesive resists clouding
  • Fluid resistance
  • High Optical Clarity with >80%
  • Low level of extractables in a variety of solvents
  • Adheres to a wide range of substrates
  • Suitable for wide temperature range -94° to 212° F
  • Conformable

Markets Served

N/A Medical


N/A Polypropylene Film

Backing / Carrier Thickness

N/A 2.0 mil

Adhesive Coating

N/A Single Coated

Adhesive Type

N/A Acrylic Based

Adhesive Thickness

N/A 1.2000 mil

Release Liner

N/A 63# White Silicone-Coated Paper (4.9 mil)

Total Thickness

N/A 3.2 mil


N/A Clear

Maximum Width/ Master Roll Width

N/A 48 in

Adhesion to Steel

N/A 25 oz/in

Tensile Strength

N/A MD 40 lb/in

Elongation Percentage

N/A 186 %

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2019, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform