Fabricators of Adhesive Tapes & Flexible Materials
3M™ 9792R Aluminum Diagnostic Tape consists of a silver, dead-soft aluminum foil coated on one side with pressure sensitive acrylate adhesive, supplied with a brown silicone coated paper release liner. (Liner wound "IN")  This highly conformable foil is used for for Diagnostic & Bioanalytical Constructions. 
Unit of Measure


N/A 3M™

Brand Part Number

N/A 3M 9792R

Primary Application

N/A Medical

Application Description

  • Bionalytical devices
  • Microplate Seals


  • Highly conformable
  • Pierceable
  • Fluid resistance
  • Low level of extractables in a variety of solvents
  • Adheres to a wide range of substrates
  • Suitable for wide temperature range -94° to 212° F

Markets Served

N/A Medical


N/A Dead Soft Aluminum

Backing / Carrier Thickness

N/A 1.4 mil

Adhesive Coating

N/A Single Coated

Adhesive Type

N/A Acrylate

Adhesive Thickness

N/A 1.1000 mil

Release Liner

N/A 61# Brown Kraft Paper with Silicone C1S (4.6 mil)

Total Thickness

N/A 2.5 mil


N/A Silver

Maximum Width/ Master Roll Width

N/A 42 in

Adhesion to Steel

N/A 41 oz/in

Tensile Strength

N/A MD 16 lb/in

Elongation Percentage

N/A 8 %

Service/Operating Temperature

N/A -94 to 212 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2019, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform