Fabricators of Adhesive Tapes & Flexible Materials
  

MBK KFT1AS is a 1 mil polyimide film backing with high performance silicone adhesive designed for high precision and low static applications. Static Charge for unwinding and peel off are below 50 volts (50% RH,70F).

Standard rolls of polyimide film are available in various grades and thicknesses. Custom adhesive backings, sizes and shapes available upon request.

Unit of Measure

Brands

N/A MBK

Brand Part Number

N/A MBK KFT1AS

Primary Application

N/A Gaskets Masking Sealing

Application Description

N/A
  • Used for insulating & masking

Features

N/A
  • Anti-Static and high precision
  • Resistant to heat and chemical
  • Dielectric strength above 5,00 v

Markets Served

N/A Aerospace Defense Electrical Electronics

Backing / Carrier

N/A Polyimide Film

Adhesive Coating

N/A Single Coated

Adhesive Type

N/A Silicone

Adhesive Thickness

N/A 2.0 mil

Color

N/A Amber

Maximum Width/ Master Roll Width

N/A 19.5 in

Service/Operating Temperature

N/A 450 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2017, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform