Fabricators of Adhesive Tapes & Flexible Materials
3M™ 9472LE Adhesive Transfer Tape is a 5.0 mil 300LSE low surface energy acrylic adhesive on a 4.2 mil 58 lb. polycoated kraft paper liner. Thicker adhesive assures positive bonding to textured LSE plastics and powder coatings.
Unit of Measure


N/A 3M™

Brand Part Number

N/A 3M 9472LE

Primary Application

N/A Bonding Industrial Laminating

Application Description

  • Used for hard to stick to plastics and painted metal applications, rough or dissimilar surface applications
  • Attaching identification material to lightly oily surfaces typical of machine parts
  • Polycoated kraft liner for die cutting end tabs and waste removed nameplates on a common carrier


  • High initial adhesion
  • Resistant to water, UV, solvent, chemical
  • Strength increases with time & temperature
  • Good adhesion to LSE Low surface energy plastics such as polypropylene and powder coatings

Markets Served

N/A Displays Electrical Electronics Graphics Manufacturing


N/A Unsupported

Adhesive Type

N/A Acrylic 300LSE

Release Liner

N/A 58 lb Polycoated Kraft Paper - Unprinted

Adhesive Thickness

N/A 5.0 mil

Maximum Width/ Master Roll Width

N/A 54 in

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2020, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform