Fabricators of Adhesive Tapes & Flexible Materials
3M™ 9471LE Adhesive Transfer Tape is a 2.0 mil, 300LSE high strength acrylic adhesive on a 4.2 mil thick, 58# polycoated kraft paper liner.  This adhesive provides a very high bond strength to most surfaces, including low surface energy plastics, powder coated paints and lightly oiled metals. Having good resistance to chemicals, moisture and humidity, it is used in a variety of industries; Automotive, Transportation, Specialty Vehicle, Medical, General Industrial, Oil and Gas, Signage, Military and Government, Appliance, MRO, Electronics, Metalworking and Woodworking.
Unit of Measure


N/A 3M™

Brand Part Number

N/A 3M 9471LE

Primary Application

N/A Bonding Laminating

Application Description

  • Used for laminating to hard to stick to surfaces where a thin adhesive is needed, on labels and graphics in all industries including the medical industry
  • Attaching identification material to lightly oily surfaces typical of machine parts and the automotive or aircraft industries
  • Polycoated kraft liner for die cutting end tabs and waste removed nameplates on a common carrier


  • High initial adhesion
  • Resistant to water, UV, solvent, chemical
  • Strength increases with time & temperature
  • Outstanding adhesion to LSE low surface energy plastics, powder coated paints, and lightly oiled metals
  • Excellent holding power even at temperatures up to 300 ºF
  • Extremely smooth adhesive for excellent graphics appearance
  • Use on smooth, rough and textured surfaces
  • Meets UL 969, Ford WSS-M11962 Specifications

Markets Served

N/A Appliances Automotive Defense Displays Electrical Electronics Graphics Manufacturing Medical Transportation


N/A Unsupported

Adhesive Type

N/A Acrylic 300LSE

Release Liner

N/A 58 lb Polycoated Kraft Paper (4.2 mil)

Adhesive Thickness

N/A 2.3 mil


N/A Clear

Maximum Width/ Master Roll Width

N/A 54 in

Adhesion to Steel

N/A 75 oz/in

Service/Operating Temperature

N/A -40 to 300 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2020, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform