Fabricators of Adhesive Tapes & Flexible Materials
 
Mactac® CleanBond™ CB4181-80 consists of a .5 mil polyester carrier coated on both sides with 1.8 mils of clean, aggressive acrylic pressure sensitive adhesive. The adhesive is protected by a two-side silicone coated 80# Natural polycoated Kraft liner. This product is designed for applications that benefit from a clean, chemically inert adhesive tape.
Unit of Measure

Manufacturer

N/A Mactac®

Brand Part Number

N/A CleanBond™ CB4181-80

Primary Application

N/A Bonding Electrical Sealing

Application Description

N/A
  • Insulation and shielding
  • Wire harnessing
  • Foam bonding applications
  • Interior applications that require low VOC and low FOG characteristics
  • Flexible printed circuits
  • Printed circuit boards
  • General mounting
  • Appliance
  • Transportation, Automotive & Aerospace
  • POP/Signage
  • Low VOC
  • Electronics
  • Building & Construction
  • Foam fabrication

Features

N/A
  • Low VOC - JIS A-1901
  • Log FOG - VDA278
  • Acid free
  • Non-outgassing and non-migratory
  • Smooth adhesive profile
  • Excellent adhesion to a wide variety of surfaces
  • Chemical and UV resistant
  • Moisture stable PCK liner
  • Good shear properties
  • Non-corrosive & non-oxidizing
  • Excellent handling and die-cutting

Markets Served

N/A Aerospace Appliances Automotive Displays Electronics Transportation Construction

Materials/Backing/Carrier

N/A Polyester Film

Backing / Carrier Thickness

N/A 0.5 mil

Adhesive Coating

N/A Double Coated

Adhesive Type

N/A LV820 Low VOC Acrylic

Adhesive Thickness for Exposed/Unwind Side

N/A 1.8 mil

Adhesive Thickness for Liner Side

N/A 1.8 mil

Release Liner

N/A 80 lb Natural Polycoated Kraft Paper Medium Release (6.1 mil)

Adhesive Thickness

N/A 4.1 mil

Maximum Width/ Master Roll Width

N/A 54 in

Tack Level

N/A 7.0 lb/in²

Tensile Strength

N/A MD/CD: 10 lb/in

Service/Operating Temperature

N/A Application: Above 50 ºFService Range: -40 to 300 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2018, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform