Fabricators of Adhesive Tapes & Flexible Materials
  
3M™ 9471FL Adhesive Transfer Tape is the film linered version of 9471LE used for rotary processing.  This clear 2.0 mil, 300LSE high strength acrylic adhesive on a 2 mil polyester film liner is ideal for rotary die-cutting, high speed processing, automatic dispensing and clean room environments.  The polyester liner resists breakage for one piece liner removal and resisists curling or wrinkling in high humidity.  The high strength acrylic adhesive provides a very high bond strength to most surfaces, including low surface energy plastics, powder coated paints and lightly oiled metals.  This adheisvie has high temperature holding, high moisture and solvent resistance.  It is used in a variety of industries; Automotive, Transportation, Specialty Vehicle, Medical, General Industrial, Oil and Gas, Signage, Military and Government, Appliance, MRO, Electronics, Metalworking and Woodworking.
Unit of Measure

Brands

N/A 3M™

Brand Part Number

N/A 3M 9471LLF

MBK Item #

N/A 9471FL

Primary Application

N/A Bonding Laminating

Application Description

N/A
  • Used for laminating to hard to stick to surfaces where a thin adhesive is needed, on labels and graphics in all industries including the medical industry
  • Attaching identification material to lightly oily surfaces typical of machine parts and the automotive or aircraft industries
  • Nameplates and graphic overlays printed and die-cut by rotary processing techniques
  • Gaskets and other die-cut parts on difficult to bond surfaces

Features

N/A
  • High initial adhesion
  • Resistant to water, UV, solvent, chemical
  • Strength increases with time & temperature
  • Outstanding adhesion to LSE low surface energy plastics, powder coated paints, and lightly oiled metals
  • Excellent holding power even at temperatures up to 300 ºF
  • Extremely smooth adhesive for excellent graphics appearance
  • Use on smooth, rough and textured surfaces
  • Meets UL 969, Ford WSS-M11962 Specifications

Markets Served

N/A Displays Electrical Electronics Graphics Manufacturing Transportation

Backing / Carrier

N/A Unsupported

Adhesive Type

N/A Acrylic 300LSE

Release Liner

N/A Polyester Film (2 mil)

Adhesive Thickness

N/A 2.0 mil

Color

N/A Clear

Maximum Width/ Master Roll Width

N/A 54 in

Adhesion to Steel

N/A 75 oz/in

Service/Operating Temperature

N/A -40 to 300 ºF

GENERAL NOTE

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.
© 2017, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform