3M™ VHB™ 5962 is a 62 mil black very conformable foam with modified acrylic adhesive on both sides. The adhesive provides excellent adhesion to a broad range of substrates including low surface energy materials such as powder coated paints and plastics. Provides handling convenience, cushioning, damping, and impact resistance. Paper or film liner products are available.
Unit of Measure
Brands |
N/A 3M™ |
Brand Part Number |
N/A 3M 5962 |
Primary Application |
N/A Bonding Gaskets Industrial Sealing |
Application Description |
N/A
|
Features |
N/A
|
Markets Served |
N/A Construction Displays Electrical Electronics Graphics Manufacturing Transportation |
Backing / Carrier |
N/A Acrylic Foam |
Adhesive Coating |
N/A Double Coated |
Adhesive Type |
N/A Modified Acrylic |
Release Liner |
N/A Red Polyethylene Film |
Adhesive Thickness |
N/A 45.0 mil |
Color |
N/A Black |
Maximum Width/ Master Roll Width |
N/A 48 in |
Density |
N/A 40 lb/ft³ |
Adhesion to Steel |
N/A 20 oz/in |
Tensile Strength |
N/A 90 lb/in |
Service/Operating Temperature |
N/A Long Term 250 ºFShort Term 300 ºF |
GENERAL NOTE |
N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective. |