Fabricators of Adhesive Tapes & Flexible Materials
  
Avery Dennison™ FT A Double Coated Polyester Tape has a polyester film carrier with pure acrylic based adhesive on both sides.  It was designed for bonding to a wide variety of plastic, metal and foam substrates where resistance to plasticizers and high temperatures are required.
Unit of Measure

Brands

N/A Avery Dennison

Brand Part Number

N/A FT A

Primary Application

N/A Bonding Industrial

Application Description

N/A
  • Bonding to a wide variety of plastic, metal and foam substrates where resistance to plasticizers and high temperatures is required

Features

N/A
  • Elevated temperature, solvent and plasticizer resistant
  • Conforms to contoured surfaces
  • Excellent adhesion and tack
  • Bonds well to a variety of surfaces well as LSE low surface energy surfaces
  • Excellent processing and die-cutting stability

Markets Served

N/A Manufacturing

Backing / Carrier

N/A Polyester Film

Adhesive Coating

N/A Double Coated

Adhesive Type

N/A Acrylic

Release Liner

N/A 60 lb Densified Kraft Paper (3.6 mil)

Adhesive Thickness

N/A 4.5 mil

Maximum Width/ Master Roll Width

N/A 54 in

Adhesion to Steel

N/A Liner Side 70 oz/inUnwind Side 70 oz/in

Service/Operating Temperature

N/A 200 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2017, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform