3M™ 9471LE Adhesive Transfer Tape is a 2.0 mil, 300LSE high strength acrylic adhesive on a 4.2 mil thick, 58# polycoated kraft paper liner. This adhesive provides a very high bond strength to most surfaces, including low surface energy plastics, powder coated paints and lightly oiled metals. Having good resistance to chemicals, moisture and humidity, it is used in a variety of industries; Automotive, Transportation, Specialty Vehicle, Medical, General Industrial, Oil and Gas, Signage, Military and Government, Appliance, MRO, Electronics, Metalworking and Woodworking.
Unit of Measure
Brands |
N/A 3M™ |
Brand Part Number |
N/A 3M 9471LE |
Primary Application |
N/A Bonding Laminating |
Application Description |
N/A
|
Features |
N/A
|
Markets Served |
N/A Appliances Automotive Defense Displays Electrical Electronics Graphics Manufacturing Medical Transportation |
Backing / Carrier |
N/A Unsupported |
Adhesive Type |
N/A Acrylic 300LSE |
Release Liner |
N/A 58 lb Polycoated Kraft Paper (4.2 mil) |
Adhesive Thickness |
N/A 2.3 mil |
Color |
N/A Clear |
Maximum Width/ Master Roll Width |
N/A 54 in |
Adhesion to Steel |
N/A 75 oz/in |
Service/Operating Temperature |
N/A -40 to 300 ºF |
N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective. |