Fabricators of Adhesive Tapes & Flexible Materials
  

Avery Dennison® FT1126 Transfer Tape is a 5 mil modified acrylic adhesive on a densified kraft liner. This adhesive transfer tape is designed for applications requiring an acrylic adhesive for laminating to polyether and polyester urethane foams where high initial tack and adhesion are required.

Unit of Measure

Brands

N/A Avery Dennison

Brand Part Number

N/A Avery FT1126

Primary Application

N/A Bonding Industrial Laminating

Application Description

N/A
  • Designed for applications requiring an acrylic adhesive for laminating to polyether and polyester urethane foams where high initial tack and adhesion are required

Features

N/A
  • Adheres to wide variety of smooth & textured substrates
  • Excellent initial tack
  • Superior die cutting properties
  • Complies with FDA Title 21 CFR Section 175 for Indirect Food Contact and European Commission Directive 2002/27/EC

Markets Served

N/A Electrical Electronics Food & Beverage Manufacturing

Backing / Carrier

N/A Unsupported

Adhesive Type

N/A Modified Acrylic

Release Liner

N/A 80 lb Densified Kraft Paper (4.6 mil)

Adhesive Thickness

N/A 5.0 mil

Maximum Width/ Master Roll Width

N/A 54 in

Adhesion to Steel

N/A Hi-Tack 75 oz/in

Service/Operating Temperature

N/A High Temperature 200 ºF

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2017, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform