Fabricators of Adhesive Tapes & Flexible Materials
  
3M™ Flexomount™ Solid Printing Tape 411DL is a gray double coated tape with a soft-rubber adhesive on each side of a vinyl carrier. Designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeve systems. The adhesive is specially formulated for clean removability.
Unit of Measure

Brands

N/A 3M™

Brand Part Number

N/A 3M 411DL

Primary Application

N/A Bonding Industrial

Application Description

N/A
  • Printing solid and line work
  • Mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeve systems

Features

N/A
  • Sticky back tape
  • Clean removability

Markets Served

N/A Manufacturing Printing

Backing / Carrier

N/A SPVC Solid Polyvinyl chloride Film

Adhesive Coating

N/A Double Coated

Adhesive Type

N/A Soft Rubber

Release Liner

N/A Available in double or single liner

Adhesive Thickness

N/A 15.0 mil

Color

N/A Gray

Maximum Width/ Master Roll Width

N/A 36 in

Adhesion to Steel

N/A 50 oz/in

N/A The physical properties listed are typical values based on PSTC, ASTM and other standard tests. This data should be used as guides only, and not as specification limits. Our recommendations for use are based on practical experience and testing. However, it is the responsibility of the user to determine the suitability of the product for his intended use. MBK Tape Solutions will not assume liability for claims beyond the replacement value of our product proved to be defective.

© 2017, MBK Tape Solutions  |  Site created by Thomas Web Solutions and powered by Navigator Platform